Now, before you throw the "fake nerd girl" accusation, it is probably worth taking into account that other than about 3 episodes of 4th Doctor, I haven't actually watched Doctor Who (though I do intend to, as soon as I can get a hold of any more recent episodes).
Although not a Doctor Who fan, however, I am an absolute sucker for a challenge. For the last few months/years, and essentially my total time on craft sites, I have seen loads of projects related to this popular show. I know some of the basic story line, and I must admit, this craft-fandom has been slowly but surely dragging me in. So, while I was in a particularly inspirationless state, when a friend suggested I make a Doctor Who-related Kindle cover, I couldn't resist the challenge.
Although I was reasonably happy with how this project eventually turned out, making it was a little bit of a disaster. I initially tried to do the "Police Box" sign and note on the door with a paper-to-fabric transfer stuff on leather, which failed miserably (twice). I eventually resorted to simply Modge Podging the paper onto the vinyl that I made the case out of. On the top right corner of the case, there are a series of puncture marks from where I tried (unsuccessfully) to sew the hem down about three different times before my double needle eventually gave up, and was reduced to four pieces of one double needle. During my first attempt at sewing the hem, I also ended up backstitching over the button, shattering the side of it. So, not my most successful tale of crafting.
Mishaps aside, I've put together a tutorial on how to make your own Tardis Kindle cover.
Here's what you'll need:
- Blue vinyl (it's that faux leather-type stuff)
- Lining fabric
- A print out of the signs
- Modge Podge
- A button
- Some white leather scraps
What to do:
- Cut out the basic shape of your cover (this will be determined by the size of your gadget). Cut out your signs and Modge Podge them onto some vinyl scraps. Leave to dry, then cut out, leaving a thin border.
- Cut out 5 squares from the vinyl for the door panels (the 6th will be formed by the sign you Modge Podged) and stick them on, then sew down to secure.
- Cut out 12 tiny rectangles from white leather scraps, then glue and stitch them down. Also stitch down your "Police Box" sign.
- Add a thin strip of vinyl down the middle, and sew down to secure.
- Pin your two cover pieces front-to-front and sew them together. Repeat this with your lining fabric.
- Turn the cover right-side-out.
- Add the button to the top front, and a piece of elastic to the top back.
- Insert your lining, and then fold down a hem at the top. Sew down to secure the lining.
And you're done!
|(In this photo, you can see on the top right how my needle savaged the vinyl... Eek.)|
If you want, you can also find this tutorial over here on Cut Out + Keep.
I have also been making some cushions for my university residence room, but I'll be making a university update post soon!
Thanks for reading!